The H2O Mop® HD™ is designed to thoroughly clean floor surfaces, such asmarble, ceramic, stone,tile,linoleum, sealed hardwood floors and parquet. Not all floor types are suitable for steam cleaning.
The heat and steam action may remove the wax on surfaces treated with wax. Do not use on unsealed flooring or let unit stand on any wood or heat sensitive floor for an extendedperiod of time. This could cause the wood grain to rise, in addition to other types of damage. When using on vinyl, linoleum or any other. Test the H2O Mop® HD™ on a small isolated area of your flooring prior to overall use on any floor surface.
Heat sensitive floors, use extra caution. Too much heat can melt glue in the flooring. Use only on laminated flooring that has been laid professionally and without any gaps or cracks that would permit the entry of moisture. Test the Mop® HD™ on a small isolated area of your flooring prior to overall use on any floor surface. Always check the use and care instructions of your flooring manufacturer or distributor before using the H2O Mop® HD™ When in doubt, please consult a flooring specialist. Only use the carpet glider on carpeting and rugs. Use of the carpet glider on other floor surfaces will case streaking and possibly scratching. This product emits steam and creates moisture. Water marks, discoloration or damage to the floor surface can occur if the unit is left operating too long in one place.
When using the H2O Mop® HD™ on carpet surfaces: Place the Mop Head, with Microfiber Cloth in place, on top of the carpet glider (see User's Guide for illustration). Do not attempt to use the H2O Mop® HD™ unit on carpet/rug surfaces without the carpet glider in place.
The H2O Mop HD can produce a super hot steam of upwards of 120-degreesCelsius(248-degreesFahrenheit.) This makes is effective for cleaning and sanitizing all over your home. However, it should be operated with care and by adults only over the age of 18.
Yes. In fact, the round nylon brushes area perfect tool to help you clean the mold and mildew that often grows in the grout lines.
The round nylon brushes are great for cleaning smooth hard surfaces, such as toilets, sinks, and kitchen counters. The brushes can also effectively clean the grease on pans, stoves and ovens in the kitchen. They can be used with soap or detergent to clean dirty areas.
The superheated steam loosens the dirt. It is then picked up by the micro-fiber pad and wiped away from the surface. The micro-fiber pads are machine washable and reusable.
The power cord is an extra long 20 feet (6 meters) in length. This means you can easily clean from room to room without having to constantly plug and unplug the unit into the power socket.
Over time, calcium and mineral deposits can build-up inside your steam mop. These deposits can clog your machine and may lessen the amount of steam it produces or prevent any steam at all from coming out at all. Like all steam products, your steam mop needs to be cleaned about every 25 uses, or once a month, to maintain its best performance. The video below will walk you through all the easy to follow cleaning steps to keep your steam mop working perfectly!
Yes. It is important to replace the water filter every three to four months or after approximately 20 to 25 uses as the filter becomes visibly dirty. The Water Filter removes minerals and other impurities from tap waterand alsoworks to prevent water deposits from damaging your H2O™ HD Steam Cleaner. To maximize the performance of your filter, distilled water may be used. If you need additional filters, check the accessory section of the Thane Clean™ site
To avoid puddling of water, the Microfiber Cloth must be clean and dry for use. To replace the cleaning cloth, proceed as follows: Let the cleaning cloth cool down, remove cloth from unit, replace with a new Microfiber Cloth and continue use. Select Low steam regulator position for minimal steam.
Unplug Power Cord from outlet. Allow Mop Pad/Cloths to cool down and carefully remove cleaning cloth from Mop Head, as cleaning cloth could still be hot. Any water remaining in the Water Tank shouldbe emptied prior to appliance storage. Always empty the Water Tank at the end of each use. Let any water (that may remain as a product of condensation) drain from the steam opening prior to storing the appliance. Wrap Power Cord around Upper and Lower Cord Wrap. Wipe all surfaces of the H2O Mop® HD™ a soft cloth. Store in a protected, dry area. Please store the unit in a cool and dry place when not in use. Do not leave it exposed to sunlight or rain.
Place the Microfiber Cloth on the bottom of the Mop Head and make sure all the loops on the cloth are aligned with the gripping hooks on the bottom of the Mop Head (refer to User's Guide for illustration), then press the cloth against the Mop Head so the loops on the cloth catch the gripping strips on the Mop Head and hold the pieces together.